User manual

36 37
INSTALLATIONINSTALLATION
separate grill underbench ovens
recommended cabinet design
NOTETOINSTALLER:ForSeparateGrillUnderbenchInstallationswhereaCooktopisinstalleddirectlyabovetheappliance,
aminimumclearancedistanceof10mmmustbeallowedforbetweenthebottomofthecooktop&thetopoftheSeparate
GrillUnderbenchOven.
720mm Module(s)
Bench top
720mm Module(s)
Kick Panel
Infill panel (2)
Cleat (2)
Cooker
platform
8mm
Supporting shelf 8mm below door line
to give perfect alignment of cooker
&cupboard (kickboard notched to suit).
double ovens
NOTE:Fordoubleovenmodels,onlythelowerterminationpointistobeconnected.
side opening door ovens
hard wiring detail
1� Remove terminal cover plate from rear panel of appliance�
2� Fit wires through hole in cover plate and make connections to terminals�
3� Engage wires into plastic clip� Secure plastic clip with two long silver screws
(supplied in separate bag)�
4� Replace cover plate onto rear panel�
NOTE:Doubleoven(ModelPDP794).Thisproductissuppliedwithtwooptional
terminationpoints.Onlyoneterminationpointisrequiredtobeconnected.
WMAN_Gen_Export_UM_Jun11.indd 36-37 22/06/11 4:56 PM