User manual

18
Your oven is equipped with a programmable controller that
can be used to turn on and off the oven automatically.
The cook time is used to automatically turn the oven off
after a set amount of time.
Setting the cook time
1. Select the desired oven function and cooking temperature.
2. Press the “cook time ” button as often as necessary,
until the desired cook time has been set.
3. After 8 seconds from the last time adjustment your oven
will be programmed and will start cooking.
Note:
         
       

Setting the start/stop time
The start/stop time can be used to switch the oven On and
Off at a specic time during the day.
1. Check the clock displays the correct time of day.
2. Select the desired oven function and cooking
temperature.
3. Set the required cook time.
4. Press the “start/stop” time button to move the start
and stop time forward.
5. After 8 seconds from the last time adjustment the
DELAY SET icon will light and your oven is now
programmed.
The oven will start cooking when the time of day reaches
the set start time.

        
          
          
        
       

Cooking with the timer –
electronic control oven
On completion of cooking
When the cook time has elapsed, an audible signal
will sound for 10 seconds, the oven will switch off and
COOKING FINISHED will be displayed on the left hand side
of the display. On the right hand side of the display, the
remaining time indication “0 min” will appear together with
the cooking start and stop time.
• To stop the audible signal, press any of the buttons on
the control panel.
• If you wish to cook a bit longer, press the “cook time ”
button for each additional minute you require. The oven
automatically reverts to the
function and temperature
previously programmed. This feature is available for 5
minutes after cooking has nished. After that, the oven
automatically switches off.
environmental tip
You can use the residual heat in the oven for keeping food warm.
tips and information
Even though the heating element turns off the oven will still
retain substantial heat. This will continue to cook the food
until it is removed or the oven cools down. If you do not
plan on being present when the oven turns off, you should
take this extra heating time into account.
Setting the timer
The timer can be used independently of the oven for setting
a countdown period. When the period of time has elapsed,
an audible signal sounds.
1. Press the timer button.
2. Set the desired length of time using the or buttons
whilst the timer bell is ashing. After 8 seconds from the
last adjustment the timer bell will stop ashing and the
timer will start to count down.
3. When the set time has elapsed, an audible signal will
sound for 10 seconds. The time indication “0 min” and
the timer bell will ash on the display.
4. To stop the signal, press any of the 3 buttons below the
Clock/Timer display.
Note:
         
EMAN_ELineOven_Aug09.indd 15 19/8/09 4:46:22 PM
18
POP783 programmable controller (continued)
Safety cut-out feature
The oven automatically switches itself off if the temperature is
not adjusted or the appliance is left operating after a period
of time� The oven switches itself off after:
• 20hourswhensetbetween30°Cand120°C
• 8.5hourswhensetbetween120°Cand200°C
• 5.5hourswhensetbetween200°Cand250°C
Using FHU (Fast Heat Up) mode
To quickly and efficiently preheat your oven, it is recommended
to select the “Fast Heat” cooking feature�
1� Ensure the appliance is on by pressing the “On / Off”�
The oven lights will light�
2� Select the desired oven function by pressing “Function”�
3. Setthecookingtemperaturebypressingthe–or+to
decrease or increase the temperature�
NOTE: The temperature can only be adjusted when the
degrees symbol “°” is flashing. The temperature setting
changes in increments of 5 °C.
4� Press the “Fast Heat”� The letters “FHU” will appear on the
temperature display�
5� When the set temperature is reached the buzzer will
sound and the set temperature will be displayed�
NOTE: “FHU” cannot be selected if the oven centre
temperature is above the preset temperature.
Activating the child-proof lock
When the child lock is engaged, the oven cannot be
switched on�
1� Switch off the appliance using the “On / Off”�
2. Press“Function”and–atthesametime,holduntilthe
word “SAFE” is displayed�
The child-proof lock is now engaged�
NOTE: When the child-proof lock function is active the time
of day and minute minder can only be set.
Releasing the child-proof lock
1. Press“Function”and–atthesametime,holduntilthe
word “SAFE” is cleared from the display� The child-proof
lock is now released and the oven is ready to use�
Beep on touch
The beep sound can be activated anytime when a symbol is
pressed�
1� Ensure the oven is off by pressing “On / Off”�
2. Press“Function”and+simultaneouslyfor2seconds,a
single beep will sound to confirm the operation� Repeat
the above procedure to reset the beep on touch mode� As
default, the beep on touch mode is off�
Demo mode
This mode is intended to be used in retail shops to demonstrate
the oven functionality without any power consumption except
the oven lamps�
1� To activate this feature the appliance should be in stand-
bymode.(Nofunctionselected).
2. Pressandhold“FastHeat”and+for2seconds,the
appliance will beep once� When the appliance is initially
turned on the letter “d” will appear in the left hand corner
of the display to confirm that the appliance is in demo
mode� All functions can be selected, but the thermometer
iconwillnotash.Repeattheaboveprocedureto
deactivate the demo mode�