User Manual

before operating your
appliance for the first time
Pizza Stone
• Insert the pizza rack into the grill side racks (lower oven)
as shown in the image below.
• Note the orientation of the pizza rack. Refer to the image
below.
• Carefully place the pizza stone inside the pizza rack.
• Slide the pizza rack fully in and close the door.
Built-in Cooking BEFORE OPERATING YOUR APPLIANCE 7
Shelves and trays (CVEP604 only)
TIPS & INFORMATION
important
The shelves are designed so that they have maximum travel
but cannot be accidentally pulled right out. The trays are
designed the same way and fit straight into the side racks.
To fit a shelf or tray to side racks:
• Locate the rear edge of the shelf/tray inbetween 2 guide
rails of the side rack - see diagram. Ensure the same rail
positions on both sides of the oven are being engaged.
• With the front edge raised, begin to slide the shelf into
the oven.
• Once the detents have passed the front edge of the side
rack, the shelf can be pushed fully in.
• The grill/baking tray for separate grill wall oven models
slides into the wire runners in a similar manner.
• When fully inserted the shelf/tray should not interfere with
the closed oven door.
• Remove extra trays and dishes before roasting or baking.
To fit a shelf or tray to telescopic slides (where fitted):
• With the slides fully pushed in, push the shelf or tray along
the top of the slide until it hits the back post.
• Drop the front of the shelf or tray onto the slide ensuring it
sits behind the front post of the slide.
• When fully inserted the shelf/tray should not interfere with
the closed oven door.
Note: Shelves and accessories must be removed when
using pyrolytic cleaning function.
Back post
Front post
Grill Side Rack
Pizza Stone
Pizza Rack