User Manual

8 OPERATING THE PROGRAMMABLE CLOCK Built-in Cooking
operating the programmable clock
3 button programmable clock
Your oven is equipped with a 3 button timer that has the
following features:
• Timer
- you can set a countdown time that will beep
when the set time has elapsed.
• Cook time
- you can set cooking duration. A timer will
count down the preset cooking time, beep when the time
has elapsed and turn the appliance off.
• End time
- instead of setting a cooking duration
you can set a cooking finish time. When the finish
time has been reached the timer will beep and turn the
appliance off.
• Delayed start cooking time - you can combine the cooking
time and end cooking time to switch oven on and off at a
specific time during the day.
Selecting the timer
• Press the MODE button until the timer ‘indicator’ begins
flashing.
• Set the countdown time you want by using the
and
buttons. 5 seconds after the last change the timer
‘indicator’ will stop flashing and the countdown will start
in minutes.
• To stop the beeper, press any button.
• Maximum countdown time is 2hrs 30mins
Setting the cooking duration
• Select the desired oven function and temperature.
• The oven indicator light will glow and the heating source
will come on.
• Press the MODE button until the cook time
‘indicator’
begins flashing.
• Set the cooking duration you want by using the
and
buttons. Five seconds after the last change the cook time
‘indicator’ will stop flashing, and the time of day will be
displayed.
• To stop beeper, press any button.
Note: Remember to add pre-heating time if necessary.
Setting the cooking end time
• Check that the clock displays the correct time of day.
• Select the desired oven function and temperature. The
oven indicator light will glow and the heating source will
come on.
• Press MODE button until the end time
‘indicator’
begins flashing.
• Enter the time of day you want to finish cooking by
pressing
or buttons. Five seconds after the last
change, the end time ‘indicator’ will stop flashing and the
current time of day will be displayed.
• To stop beeper, press any button.
Setting the delayed start cooking time
• Set the cook time
and end time as described in
the previous sections.
• Once both the cook time and end time have been set, the
cook time and the end time ‘indicators’ will stop flashing
and the current time of day will be displayed.
• To stop beeper, press any button.