RANGEHOOD User Manual CS910CS, CRC914SB, CRC914DB
CONGRATULATIONS CONTENTS Congratulations and thank you for choosing our canopy rangehood. We are sure you will find your new rangehood a pleasure to use. Before you use your rangehood, we recommend that you read through the whole user manual, which provides the description of the rangehood and its function.
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS This manual explains the proper use of your new canopy Always cover lit gas burners with pots or pans when rangehood. Please read this manual carefully before using canopy rangehood is in use. the product. This manual should be kept in a safe place for switchwith off pots gas burners This manual explains the proper use of your new Always cover lit Always gas burners or pansbefore when you remove pots handy reference. or pans. rangehood.
DESCRIPTION OF YOUR RANGEHOOD 1 2 Flue pipe to be sourced locally 3 4 5 6 7 Components list 1. Screws x 2 2. Telescopic flue cover set 3. Upper flue cover mounting bracket 4. Lower flue cover mounting bracket 5. Flue transition duct 6. Main body and fan housing assembly 7. Grease filters Additional items required for installation • Fixings required to attach rangehood body and anti tilt points. • Fixings required to attach flue cover mounting brackets to the wall. • Duct tape or cable ties.
RANGEHOOD DIMENSIONS 290mm 320mm 538mm 1135mm (maximum) 690mm (minimum) 56mm 900mm 500mm Fig. 4 NOTE: The fan housing flue transition duct is 150mm in diameter. (See page 11 for optional ducting accessories). 150mm Fig.
INSTALLATION INSTALLATION PRE-INSTALLATION PRE-INSTALLATION INSTALLATION INSTALLATION Before installingBefore the cooker installing hood, thepeel cooker off any hood, protective peel off any 1. protective Using a spirit1.
INSTALLATION Depending on the preferred installation/ducting mode, follow step 6a or 6b below. 6a.Recirculating mode (Fig. 9). Using the centre line, secure the recirculating T-piece to the wall with suitable pipe between T-piece and the exhaust transition duct. Use cable ties or suitable duct tape to secure flexible pipe to T-piece and transition duct (Fig. 11).
INSTALLATION Fig. 11 7. Electrical connection Check that the installation complies with the standards of local building, gas and electrical authorities. Before connecting to the mains supply ensure that the mains voltage corresponds to the voltage on the rating plate inside the rangehood. CAUTION Installation of telescopic flue covers Separate the inner and outer flue covers, and carefully remove the protective coating from both.
CONTROL PANEL CONTROL PANEL • Best results are obtained by using a low speed for normal conditions and a high speed when odours are more concentrated. • Turn the hood on for a few minutes before you start cooking. • The hood should be left on for 15 minutes after cooking or until all odours have dispersed. • The control switches are located on the front panel of the unit. See Fig. 12 below.
CARE & MAINTENENCE WARNING IMPORTANT: The hood must always be disconnected from the electricity supply before beginning any maintenenace work. Changing the lamps If the lamps need replacing, they must be replaced by lamps with an aluminium reflector, never dichronic lamps to avoid unnecessary overheating in the lamp holders. Suitable lamp for replacement For CRC914SB CRC914DB: GU10 3.5W LED -> DBR-3.
OPTIONAL DUCTING ACCESSORIES AR150RC AR150F AR610FS For CS910CS / CRC914SB AR610FD For CRC914DB AR910RK AR150WV AR610CF Part Numbers Description AR150RC 150mm G/Bond Roof Cowl AR150F 150mm G/Bond Flue 1200mm AR150WV 150mm Wall Vent & duct AR910RK Recirculating Kit (150-120mm reducer, T-piece & carbon filters AR610CF Replacement carbon filter AR610FS Stainless steel exhaust cover extension 1200mm AR610FD Black exhaust cover extension 1200mm 11 28/11/2012
notes 12
notes 14
Warranty FOR SALES IN AUSTRALIA AND NEW ZEALAND APPLIANCE: CHEF RANGEHOODS This document sets out the terms and conditions of the product warranties for Chef Appliances. It is an important document. Please keep it with your proof of purchase documents in a safe place for future reference should there be a manufacturing defect in your Appliance. This warranty is in addition to other rights you may have under the Australian Consumer Law.
LIKE TO KNOW MORE? For further information on all Chef appliances, or to obtain detailed dimension and installation information, call into your Retailer, phone or email our Customer Care team or visit our website: Australia phone: .......................................................... 13 13 49 email: ........................... customercare@electrolux.com.au web:...........................................chefappliances.com.au New Zealand phone: .................................................
