User manual

DIMENSIONS ARE IN MILLIMETRES
INSTALLING THE COOKER HOOD
COMPONENTS LIST
COMPONENTS NOT INCLUDED
1 body assembly with grease lter
1 telescopic ue cover set
2 cover ue mounting brackets
1 instruction book
1 plastic bag containing screws for xing
telescopic ue covers
1 plastic duct transition: oblong to round
Fixings required to attach cover ue mounting
brackets to wall.
Fixings required to attach the cooker hood to
wall.
Remove polystyrene packaging from inside
behind fan motor.
(Diagrams
C)
Before installing the cooker hood, peel o any
protective plastic covering.
NOTE:
Some installations may require
telescopic ue cover cut to length.
Cut with tin snips or a ne-tooth
hack saw blade, taking care not to
distort or dent ue cover .
Diagram B:
Recommended working heights.
Cover ue mounting bracket locations.
Te lescopic cover ue xing points.
C
L
Hood base
Top of hob
MINIMUM:
600 electric
650 gas
MAXIMUM :
800 mm
B
A
1264(max)
540
435(max)
316
277
89
600/900
500
53
95 95
125 125
253
232
117.5 117.5
24
Warning: Failure to install the screws or xing device in accordance with these instructions may result in electrical hazards.
The maximum space between the wall and screw cap is 5mm.
C
The air must not be discharged into a ue
that is used for exhausting fumes from
appliances burning gas or other fuels.
3