Instruction Manual

14
Step 7: Access the gas puck. Separate the gas tube
stopper. To do this push the spring-loaded plunger
flush with a drift pin an undo the stopper with the aid
of a screwdriver counterclockwise and withdraw the
gas puck.
CLEANING AND MAINTENANCE OF THE SHOTGUN
A) Follow procedures for unloading the shotgun as described previously
B) Follow procedures for disassembly of the shotgun as described previously.
Materials needed to clean this shotgun are: a cleaning rod, cotton bore
patches, brass bore brush, powder solvent, a small soft brush and good
quality gun oil.
WARNING: Lead or lead compounds are known to the State of California to
cause cancer, birth defects, reproductive toxicity, and other serious physical
injury. Those who clean shotguns should take protective measures to avoid
contact or exposure to such chemicals.
2. Using the bore brush with powder solvent scrub the barrel and
chamber to remove any powder and lead residue in the bore. Always and