Instruction Manual

13
Step 3: Grasp the dust shroud and pull it away from the receiver body, now
the internal mechanism of the shotgun is exposed
Step 4: Push the Upper Receiver Latch forward with
your thumb and index finger controlling the latch.
Push the latch far enough forward so that it is free of
the latch rails and lift up and remove the latch
assembly from the receiver... Be careful because
the latch is under spring tension.
Step 5: Disengage safety and then pull bolt assembly to the rear and remove
from receiver.
Step 6: Separate the bolt from the bolt support, to do this move the bolt
backward, give it half a turn counterclockwise and take it out by using a
forward motion. To reassemble start with reinstalling bolt assembly and work
your way backward through the steps of assembly.