Instruction Manual

6. Visually inspect the chamber for obstructions by moving the bolt back and

looking into the chamber. The chamber should be free of oil or grease or

obstructions... The chamber is the rear portion of the barrel where the

cartridge slides into from the pressure applied by the bolt.

7. After determining there are no obstructions in the chamber release the bolt

and move the safety up or in the safe position, so that it blocks the

movement of the trigger.

8. Insert five or less cartridges into the magazine.

**WARNING**

Never insert the magazine into the receiver until you are ready to fire the

shotgun...

9. Retract the bolt and, using the bolt hold open, lock it in the open

position. You may now insert the magazine as described in the previous

section.