Installation guide

CheckVideo® products allow for cloud-based, intelligent vide surveillance
and alarm vericaon in virtually any indoor, outdoor or remote locaon.
They enhance security and improve business operaons with real-me event
detecon, sending alerts to emails, smartphones or a monitoring service for
immediate response.
This guide covers installaon, registraon, and conguraon of the CheckVideo
Gateway (referred to as a “CheckVideo device” in the CheckVideo Portal). Once
you complete the process, you will have an acve system tailored to your specic
needs.
For more informaon on using CheckVideo, please refer to the CheckVideo
Online Help. Aer registering your CheckVideo Gateway you can view the Online
Help by signing in at portal.checkvideo.net, then going to the Support tab.
Welcome
page 1CheckVideo Gateway for Broadband Networks Installaon Guide
Table of Contents Page
Step 1 Check Equipment and Network 2
Step 2 Install Cameras 3
Step 3 Connect CheckVideo Gateway 4
Step 4 Account Registraon 5
Step 4-1 Register Primary User 6
Step 4-2 Dene Nocaon Methods for Primary User 7
Step 4-3 Dene Billing Preferences (Professional Service) 8
Step 4-4 Review License Agreement (Professional Service) 9
Step 5 Add CheckVideo Device 10
Step 5-1 Congure Live Video for Remote Viewing 11
Step 5-2 Update Firmware (if necessary) 12
Step 6 Congure Camera 13
Step 6-1 Congure Events (Zone Setup) 15
Step 6-2 Congure Events (Schedule Conguraon) 16
Step 6-3 Dene Nocaon Methods by Camera (oponal) 17
Step 7 Set Up Recording 19
About the Dashboard 20
Helpful Hints in Making CheckVideo Work for You 21
Appendix: Port Forwarding Conguraon Tips 22