Installation guide
On the Congure Device page, Select Camera secon (Figure 20), select and
congure your cameras.
This page may require you to install Adobe® Flash® Player to see the camera
image. To enable this feature:
• Click the Get Flash link that appears where the camera view should be.
• Follow the prompts to install Adobe Flash.
Select the camera you wish to congure.
An image from the camera, also called the ‘eld of view’, should appear in the
Viewer window.
If a camera image does not appear, click the Refresh Image buon. In some
instances, it can take up to two minutes for a new image to appear.
Once you obtain a eld of view, use this image as a reference to readjust the
camera to a more desirable view, if necessary. Refer to the CheckVideo Camera
Placement Guide for guidelines on posioning your camera.
Note: If you move or reposion a camera, you must use the Refresh
Image feature to capture the new eld of view and ensure your
saved preferences remain unchanged.
Step 6 Congure Camera
Figure 20 Congure Device page, Select Camera secon
page 13CheckVideo Gateway for Broadband Networks Installaon Guide