Installation guide

Step 6-1 Congure Live Video for Remote Viewing
page 12CheckVideo Gateway for Mobile Broadband Networks Installaon Guide
On the CheckVideo Dashboard, click Devices > Remote Video Setup
to congure viewing live or recorded video from any computer with
broadband Internet access. CheckVideo automacally displays networking
informaon about your device.
To allow you to stream live or DVR video from the CheckVideo device to
remote users using the CheckVideo portal, enter any value between 9000
and 65535 in the Device Port Number eld. In the example in Figure 23, the
port assignment is 27129.
Click the Save buon.
Note: If your system includes more than one device, select each
device from the System Map to assign a port number to
the device.
Note: When operang over the 3G network, you don’t need to set up
port fowarding to enable remote video. If the 3G connecon is
used as a failover for an Ethernet connecon, you will be
required to set up port forwarding. For informaon, please refer
to the CheckVideo Online Help.
Figure 23 Remote Video Setup page