Installation guide

10
6. Click the Channel tab to select options to customize image attributes:
Activate Motion Detect
1
- Check to enable the camera to detect moving objects (to alert optional
external devices).
Sensitivity Level - When Activate Motion Detect is enabled, set the sensitivity by clicking either the
Low, Med. or High radio button.
Images (Trigger) Buffer - Select the number of images to be stored in the pre-alarm and post alarm
buffers and to be sent to the VideoAlert.net server in the event of a trigger activation.
Brightness - Select the light level displayed on the video screen.
Contrast - Change the difference between the lightest and darkest areas displayed on the video screen.
Saturation - Increase to intensify each color displayed.
Hue - Select the predominant wavelength of color displayed.
Default - Click to display the original Brightness, Contrast, Saturation and Hue settings assigned to the
application before changes were specified.
Select Channel - Click to display the features associated with each video input.
Device - Check to select optional triggered output devices. Examples include relays to be triggered
when a specific event occurs or
Image Format - Select the desired resolution of the images to be sent to the VideoAlert.net server in the
event of a trigger input activation.
Click Reload to revert to the original settings before changes were selected or click Save to update and
save the new settings.
1 If video motion detection is enabled, ensure that the camera is not in an environment
that would cause the “run-away” transmission of multiple video clips to the server.