User's Manual
Table Of Contents
- 1.0 INTRODUCTION
- 2.0 GENERAL DESCRIPTION
- 3.0 Quick Connect Interfaces
- 4.0 System Hardware
- 5.0 SPECIFICATIONS
- 6.0 USING DMS TO APPLY SOFTWARE SETTINGS
- 7.0 POWER SUPPLY REQUIREMENTS
- 8.0 DEVICE LABELING
USER'S MANUAL, NP10, NP20, NG10 (ALL NEO SYSTEM MODELS)
CHECKPOINT SYSTEMS, INC. FOR EXTERNAL USE
Document No. 10071753 Rev. 02 Page 28 of 28
8.0 DEVICE LABELING
8.1 Internal Label
Each NEO will have a label, found in the base region, which indicates this specific unit’s
Model Name, part number, revision and the serial number of the unit manufactured, as
well as regulatory information. For example:
Cellular:
FCC ID: DO4NEO-C
WiFi:
FCC ID: DO4NEO
Device agency label will also show country/region specific markings, indicating approval
is obtained in that region.
As required by Canada IC (Industry Canada), all NEO units' internal labels shall bear text:
IC: 3356B-NEO
Cellular: IC: 6369A-MS2372H517
Wi-Fi: 10531A-80804XX
Bluetooth: 11232A-USBBT1EDR4
8.2 External Label
Each NEO has a second label which shows the Model Name and serial number of the unit
manufactured. There is no regulatory information on this label. The reason for this label is
Field Service can check the hardware to the product packaging, and for RMA (get the S/N
of the antenna without having to open up the system for viewing the internal label).