User Manual

www.alphaworld.com
Instructions for the Nano Gate
NANOGATE-AM
PAGE 2
Figure 1 - Drill holes as indicated
on template.
Figure 2 - Screw in bottom Bracket.
Figure 4 - Insert bottom end of Nano Gate
into bottom Bracket.
Figure 3 - Screw in top screw only -
allowing space for the Bracket to
slide on.
Figure 7 - Plug power supply cord in power box and wind extra cable
into storage box. Mount storage box.
Figure 6 - Screw remaining screws into top
Bracket.
INSTALLATION:
Figure 8 - Screw in both top and
bottom Caps.
Figure 5 - Push top Bracket down
onto Nano Gate.
Figure 9 - Nano Gate is
now installed.