User's Manual

Checkpoint Systems Intern. GmbH Company Confidential For Internal Use Only
Last Updated: 6/3/2014 11:10 AM 12 of 20
3.5 Battery Replacement
Picture shows battery in holder
- Battery: Coin Cell CR1632 3V 110mAh
- Before replacing battery measure battery voltage with voltmeter. New battery has 3V.
Buffered SRAM and clock work with voltage down to 2V. Replace battery so soon as
voltage is down to 2.2V
- Pull out discharged battery and replace it. Take care not to short-circuit Plus and
Minus.
- Check battery for right position
List of tested batteries
CR1632 Panasonic 140mAh
CR1632 Energizer 130mAh
CR1632 Renata 125mAh
Minus
Plus