Installation Manual

PX/QX with Coupler Installation Manual Version *61
C H A P T E R
2
IN
ST ALL AT ION OVERVIEW
Over
view
Thi
s chapter is an overview of the installation process:
1. Requirements: Tool and part requirements for a typical installation.
2. Installation Outline: Lists the basic installation steps in sequence.
Requirements
Too
ls
The following tools are required for Liberty Antenna installations:
 Arro
w T-25 Staple Gun
 Diagonal wire cutter
 Hammer drill with 3/16” and 1/2” bits
 Extension cord
 Tape Measure
 Hammer
 Marker, Black Felt
 Ratchet driver with 9/16” socket
 Screwdrivers, mini, regular and #2 Phillips
 Hacksaw
 Utility knife
 Wire Snake
 Wire Strippers
 Wrench, combination end 9/16”
 PX/QX With Coupler Installation Manual (This manual)
 Tuning Procedure, TR4024/26 Checkpoint 7255486
 Checkpoint Systems Field Service Diagnostic Management Software (DMS version 1.5.8
or later version) installed on a laptop with the appropriate cables. DMS is an application