Installation Manual

PX/QX with Coupler Installation Manual Version *61
F
i
gu
re 11 Communication cable
COMM Cable (CAT5E)
Wire Color Description J13/J14
Blue D
B
- 1
White -Blue DB+
2
Drain GND
3
NC GND
4
White-Orange CB+ 5
Orange CB- 6
Table
3 Communication Cable Wiring Table
Wiring 24VDC power supply
A Checkpoint certified 24VDC power supply can power up to two (2) PABs. It is recommended to
wir
e the 24VDC power suppler to the nearer PAB (J8), then, connect wire from this PAB’s J12
connector to the J8 connector in the other PAB (J8). (See Figure 13 24 VDC power supply wiring
method). 24VDC power cable uses AWG18 two (2) conductor cable.
Connect Pin # Wire Color Description
1 Bla
ck GND
3 Red +
24 V
Table 4 Power Cable Wiring Table
Figu
re 12 24 VDC Power Supply Cable