Installation Guide Part 3

NGL FX Installation Manual Rev. * 53 of 84
Table 4: Application Description
Tag
Frequency
Alarm
Severity
Tag
Frequency
Alarm
Severity
Application Name
Primary Secondary
Standard: 8.2 8.2 M - -
Library: 9.5 9.5 M - -
Immunity: 8.2 8.2 M - -
Corral: 8.2, 9.0 8.2 M 9.0 H
Rev Corral: 9.0, 8.2 9.0 M 8.2 H
Apparel: 8.2, 9.2 8.2 M 9.2 H
Japan1: 8.2=9.5 8.2 M 9.5 M
Japan2: 8.2, 9.5 8.2 M 9.5 H
Pharma: 8.2, 7.2 8.2 M 7.2 C
RazorKeeper: 8.2, 7.2 8.2 M 7.2 H
Configuring SAM (Smart Alarm Management)
This chapter details the steps and options for configuration of the Smart Alarm Management
(SAM) system in DMS.
Note:
For information on installation and use of the DMS system, see the documents Field Service
Diagnostic Management
Navigating to the SAM Screen
Use DMS to connect to the desired TR4215 reader.
Note:
Although previous Liberty systems required the "TR4024/26" Device setting in the DMS
Connection Settings window, NGL uses the "Evolve" Device connection.
The Access page describes the current settings for the antennas in the group (shown in Figure 31:
Network View of Antenna Settings and Figure 32: List of Current Antenna Settings).