User's Manual
Table Of Contents
- Statements
- Table of Contents
- ILS Open Plus Exit Antenna Installation
- Requirements
- Overview
- Safety Instructions - Read Before Beginning
- Gate Features
- Site Survey
- Disassemble the Gates
- Install the Gate Base
- Connecting the Alarm Kit to the Serial-to-Ethernet Board
- Install the Antenna Body
- Install the Cover Plates
- Antenna Configuration
- Testing the Gate Antenna
- Technical Data
- Appendix
ILS Open Plus Exit Antenna Installation: Gate Features 1-5
Antenna Dimensions
The outside dimensions of the antenna are shown below.
Figure 1.2
Antenna Outside Dimensions
Keep in mind when installing to orient the gates in the same direction to maintain a
consistent look and ensuring optimum performance.
56 mm (2.2”)
51 mm (2”)
1680 mm
(66.1”)
16 mm
(0.63”)
92 mm (3.6”)
87 mm (3.4”)
759 mm (29.8”)
759 mm (29.8”)