User's Manual
Table Of Contents
- Table of Contents
- Introduction
- Application Server
- Patron Self-Checkout Station
- Portable Inventory Reader
- ILS Remote Monitor
- Exception Ticket Printer
- CheckVIEW
- Affixing Tags
- Using Tag Programming Station
- Using DiscMate
- CheckPASS
- Troubleshooting Guide
- System Maintenance
4-18 ILS Open Plus 3.0 Installation Manual
4 Navigate to the location of your file and change the extension of the file to PSL. For
example, “Item Search.txt” becomes “Item Search.psl”.
Figure 4.24
PSL File Name Change
The next section informs you how to transfer this file to the Portable Data Terminal using
the docking station.
Transferring the Search List File
To transfer a search list file (or files) from the Intelligent Library Controller to your
Portable Data Terminal
1 Place the search file (for example, Item Search.psl) in the synchronization directory for
your Portable Data Terminal. There should be a shortcut to this directory on the
desktop of the Intelligent Library Controller.
2 Once the file is in the correct location, dock the Portable Data Terminal and the file(s)
is automatically transferred.
3 Once the file(s) has been transferred remove the Portable Data Terminal from its
cradle.
4 If ILS Inventory is not running on your Portable Data Terminal, launch the program by
tapping the Start button in the upper-left hand corner of the screen, then tap ILS
Inventory.