User's Manual

2-26 ILS Open Plus 3.0 Installation Manual
2 Click Edit. The Edit Interrogator window displays.
Figure 2.30 Edit Interrogator Window
3
Type a Group number in the Group number dialog box.
4 Click Save.
5 Close the window using the top right-hand corner X.
6 Click Save on the main window to save your changes.
7 Repeat step 2 through step 6 for each Staff Station Reader you wish to assign to a
group. You can create multiple groups.
Changing the Op Mode of Multiple Staff Station Readers
Once you have assigned multiple Staff Station Readers to a group number (accomplished
at “Creating Staff Station Reader Groups”), you can now alter the check-in or checkout
personality of a group with one operation.
1 On the Intelligent Library Controller in the Operation Selection area, select the
function desired, either Check In or Check Out.
2 From the drop-down menu next to Operation Selection, select the Group number
desired, for example all Staff Station Readers in Group 1.
3 Click Set Mode. All the Staff Station Readers in Group 1 change to reflect the new
check-in or checkout personality selected.
4 Click Save to save your changes.
Maintenance
See “Intelligent Library Controller System Maintenance” on page 13-1 for information on
maintaining the Application Server.