User's Manual

Application Server: Check System Status 2-5
• Status
Operational status of the interrogator (on-line or off-line).
• Details
Shows a history of connections for each interrogator, including IP address, port
number, whether the connection was a connect or disconnect, connection date, and
connection time. The number in parentheses (#) shows how many reconnections were
attempted. (A high number of attempts may indicate network problems.)
This section cannot be hidden from view.
Edit Interrogator
To view or edit the information for an individual interrogator:
1 In the Intelligent Library System Control window, select Maintenance > Edit
Interrogators.
2 Type the ILS username and password in the ILS Login window. The default
username is ils and the default password is maint. The Edit Interrogator window
displays:
Figure 2.7 Edit Interrogator Window
3
If necessary, use the drop-down list boxes to select the desired Interrogator (desc.)
and Branch (Figure 2.7). In the example above, SELFCHECKOUT1 will be assigned
to the Main branch.
4 Make the desired modifications, and click Save. For example, you can change the
description of the component in the Description drop-down menu by typing over the
existing description. Click Cancel to clear any changes you do not wish to save.
5 Close the Edit Interrogator window by clicking the X.