User's Manual

Using DiscMate: DVD Linking Reports 10-11
DVD Linking Reports
The Circuit Linking Utility generates information that can be compiled into reports. These
reports are viewed and printed from ILS Remote Monitor. For general usage instructions
on ILS Remote Monitor, reference the relevant chapter within the ILS User Guide.
Accessing and Printing Linking Reports
To launch ILS Remote Monitor in a single server, multi-branch environment:
1 Open a browser window.
2 Type http://<machine name of server>/ils in the address bar and press Enter.
Optionally, use the saved bookmark in your Favorites menu.
3 Type your ILS Remote Monitor user name of ilsreport and the password report123.
The ILS Remote Monitor utility displays.
4 From the top menu, click Branch and click Select of the branch where the Circuit
Linking Utility resides. The branch location is programmed when installed. If the
branch name is incorrectly installed, then you will not be able to run reports.
5 From the top menu, click Reports. The Report window displays.
Figure 10.9 CD/DVD Report Selection
The report types are explained below:
Table 10.1 CD/DVD Report Detail
Column Header Description
CD DVD Linking Summary Presents the details of what items were linked for CD/DVD
material.
CD DVD Drop Box Exception Lists anomalies that occurred at the drop box for CD/DVD
material.
CD DVD Staff Check-in Exception Lists anomalies that occurred during check-in at the Staff Station
Reader for CD/DVD material.
CD DVD Check-out Detail Lists anomalies that occurred during checkout at the Staff Station
Reader for CD/DVD material.