User's Manual

Using DiscMate: Linking Procedure 10-9
2 Select the parameters for the media you are linking:
• ensure Continuous Linking is selected
• if using a Content ID as an item identifier, click Select alternate item ID and then
select either/both Use as item ID.
• select No Security Circuit if you are linking a barcode and not an RFID tag
• select if using a Non-Locking Case (such as a jewel case)
3 Select the # of media (discs) inside the case by clicking the up and down arrows and
then clicking the number within the dialog box.
4 If linking (RFID) security and content tags:
a Wave the case with the front label down over the tag pad with the disc(s) inside.
The security tag and content tags are automatically sorted into the appropriate
fields. Hold the CD/DVD case from the bottom, face down when you wave the case
over the tag pad.
Note: If the tag pad reads the content tags first, repeated beeps will be heard. Just ignore the beeps and
try again. If the Item ID in the Security ID box is invalid, click Clear and try linking again.
5 If linking a barcode (non-RFID) and content tags:
a Scan the barcode on the case. The case’s barcode number appears. This is the
number to which the contents of the case will be linked.
b Wave each disc over the tag pad; or if the disc(s) are inside the case, wave the
entire case (front label up) over the tag pad.
6 If the green checkmark appears, your material is now automatically linked and ready to
use. Retry the operation if a red X appears. Repeat the process as many times as
necessary for the number of media and type of case selected.