User's Manual

10-2 ILS Open Plus 3.0 Installation Manual
LEDs on the Intelligent Unlocking Station
The Intelligent Unlocking Station uses three LEDs to communicate information about the
activity of the unlocking process.
Figure 10.2 Intelligent Unlocking Station LEDs
The LEDs are explained below:
Using the Standard Unlocking Station
The Standard Unlocking Station consists of a black base with a key at one side. The key
allows you to secure the station so that it cannot be used to unlock cases without
authorization.
1 If necessary, insert the key and turn to lower the locking bar.
2 Insert the long edge of the case with locked symbol (red rectangle) down into the slot
and swipe evenly across.
3 Check the case to ensure that the red rectangle does not appear. If not, rotate the case
around and swipe again. Your case is now unlocked.
Table 10.1 CD/DVD Report Detail
LED Name Description
Success Illuminates when the case is successfully unlocked.
Arm Illuminates when the case has been successfully inserted.
Power Illuminates when power has been turned on.
Arm
Power
Success