User's Manual

9-4 ILS Open Plus 3.0 Installation Manual
2 Click Auto Increment. The Server Configuration window displays:
Figure 9.3 Server Configuration window
3
Type the name of the Application Server to which you will eventually upload the tag
information; most likely it is RFIDSERVER.
4 Select the Connection Mode you will use.
• If you are connecting to Application Server, select Online. Click Connect if you
select this option to verify you have a live connection to the Application Server. A
Connected should appear.
• If you are not connecting to Application Server, select Offline. You can connect at
a later date to upload the programmed tag information.
5 Click Save, to save your choice, then Close. The Serial Port Configuration window
displays.
Note: If a format file has never been created, the Label Format Selection window appears. Contact your
Checkpoint service personnel for assistance in this instance.
Figure 9.4 Port Selection window