User's Manual
Table Of Contents
- Table of Contents
- Introduction
- Application Server
- Patron Self-Checkout Station
- Portable Inventory Reader
- ILS Remote Monitor
- Exception Ticket Printer
- CheckVIEW
- Affixing Tags
- Using Tag Programming Station
- Using DiscMate
- CheckPASS
- Troubleshooting Guide
- System Maintenance
Affixing Tags: Applying Tags to Audio Material 8-9
Applying Tags to Audio Material
Use only Standard tags on audio material.
To place tags on Audio Cases with Tapes on only one inside
section:
1 Place the tag on the inside front cover, centered horizontally and vertically.
2 Place the cover label over the tag. You can print a barcode as part of the cover label.
Figure 8.10
Sample Placement of tag and Label on Audio Material
To place tags on Audio Cases with Tapes on both inside
sections:
1 Remove the card stock from the outside sleeve of the front cover.
2 Place the tag in the sleeve, against the box, and replace the card stock so it covers the
tag.
3 If the card stock is metallic, photocopy the card stock, and replace the metallic card
stock with the photocopy.
Applying Tags to Kits
Use only Standard tags on kit material.
1 Place the tag on the outside of the bag, or on the most valuable library material in the
kit.