User's Manual

6-4 ILS Open Plus 3.0 Installation Manual
Setting the Printer’s Cut Type
Checkpoint Systems recommends that you set up the printer to do a partial cut of the
paper. This produces a string of receipts, which can be easily separated, rather than
individual receipts, which might fall and be lost.
1 On the computer you used to set up the printer, click Start > Settings > Printers and
right-mouse click the Epson printer.
2 Select Printing Preferences.
3 Select the Paper/Quality tab.
Figure 6.3 Partial Cut Select
4
From the Paper Source drop-down menu, select Form[Partial cut]. This sets the
printer to only partially cut the receipt.
5 Click OK to save your selection and close the window.