User's Manual
System Maintenance Guide
Page 7-4 Intelligent Library System (ILS) 2.0 User Manual
5. Pass the paper over the damper shaft, then pass it under the thermal head and cutter
guide.
6. Feed the paper until the end enters the presenter's roller.
Cutter’s Guide
Figure 7-3: Patron Self-Checkout Station Printer Paper Reloading – Cutter’s Guide
7. Firmly press the areas indicated with crosshatches on the thermal head until the lever
is reset.
Figure 7-4: Patron Self-Checkout Station Printer Paper Reloading – Crosshatches
8. Carefully place the paper roll on the frame, then wind the roll to remove any slack in
the paper. (Incorrectly installing the paper roll may bend the frame or cause a paper
jam.)