User's Manual

Tagging Procedures
The preferred location is on the front inside cover both centered horizontally and vertically.
the video label is metallic, place the circulation circuit in the lower front inside cover of the
If the ca
our Cover Label options are plain and double barcode
If
case.
rd stock is metallic, photocopy and replace the card stock.
Y
Figure 5-2: Tagging Video Materials
5.3. Tagging CD Materials with a Preprogrammed
ng CD Materials with a preprogrammed circulation circuit, use the following steps:
1.
Circulation Circuit
When taggi
Disassemble the CD and place the circulation circuit with the printed barcode cover
label in the lower right corner.
Figure 5-3: Tagging CD Materials with Preprogrammed Circulation Circuit
. Reassemble the CD.
. Place the second peelable barcode on the back of the CD case.
2
3
Page 5-2 Intelligent Library System (ILS) 2.0 User Manual