User`s guide

©Microcontroller-café & Checkpoint LAB M35160 ERASER/PROGRAMMER User’s Guide
8
Figure 7
4.2 READ 080 / READ 160 : PC mode
Practical steps:
1. By pressing the "READ 080" or "READ 160" button the EEPROM bytes are read from
the target device:
"READ 080” for M35080; D80D0WQ devices 8 Kbit EEPROM
"READ 160” for M35160; D160D0WQ devices 16 Kbit EEPROM
Figure 8
The “READ 080” and “READ 160” command reads the contents of the chip into a
specified file
2. The “Save As” box popup. Type new file name or select existing file (Figure 9)
NOTE: The contents of existing file will re-write to new one
3. By clicking on the “Save“ button of “Save As” box the read function will execute.
You’ll see on numeric display message “ rF“ - read file
4. To view the content read, open the buffer edit dialogue window by the
“Edit” menu button
5. By clicking on the “File” then “ Open” menu select a file to edit
6. Edit data in case of necessary. The HEX/ASCII data buffer is 8 – bit wide.
TAB key may be used to switch between HEX and ASCII data for editing
Positive result
Step 10
Click READ button
Buffer view
Step 1
Step 4