Force Test Stands Series TSF MODELS TSFM500, TSFM500H, TSF & TSFH U se r’s Guide
Series TSF Thanks! Thank you for purchasing a Mark-10 Series TSF Force Measurement Test Stand. We are confident that you will get many years of great service from this product. User’s Guide OTHER MARK-10 PRODUCTS A full line of force and torque measurement products and related items – force gauges, torque gauges, force and torque measurement test stands, sensors, grips, systems Mark-10 test stands are ruggedly built for many years of service in laboratory and industrial environments.
Series TSF User’s Guide LIST OF INCLUDED ITEMS TSF / TSFH Quantity Item TSF / TSFM500 TSFH / TSFM500H Force measurement test stand 1 1 User’s guide (this booklet) 1 1 Base 1 - Mounting leg - 2 Column cap 1 2 5/16-18 x 1” screw for base installation 4 - 1/4-20 x 3/4” screw for top cap installation 2 4 Thumb screw for gauge mounting 4 4 Mounting hole drill template 1 - Attachment kit – includes three hooks (small, medium, and large), 2” and 3” diameter compression plates, and
Series TSF User’s Guide TSFM500 / TSFM500H TSF / TSFH SAFETY TIPS OPERATION • Wear eye and face protection when testing. Although the test stand has relatively slow moving mechanisms, be aware of the dangers posed by potential energies that can accumulate in the sample during testing. • Keep away from the moving parts of the test stand. 1. Mount the test stand to a firm, flat, and level working surface for maximum safety and accuracy using four 5/16 screws (not included).
Series TSF User’s Guide TSFM500 / TSFM500H TSFM500 / TSFM500H With the base removed, the test stand can be easily integrated into large systems such as production lines. In general, the stand can be mounted on any angle (upside down, for example), although extra care should be taken during installation and operation. DIMENSIONS 5/16-18 UNC-2B X 0.600 [15.2] DEEP X4 13.5 [343] MAX (EG/BG) 31.5 [800] 14.5 [374] MAX (MG) 7.50 [190.
Series TSF User’s Guide TSFM500 / TSFM500H TSFM500 / TSFM500H The gauge bracket’s height can be adjusted along the column. Loosen the four screws that secure the bracket to the column, adjust to the desired height, and retighten the screws. POWER PLUG RECEPTACLE Located in the left rear of the Control Unit. Plug the power cord in here. Note: To maintain smooth operation of the test stand, avoid overloads and repetitive shock loads.
