Manual

ManualsBrandsCheckline ManualsSensorsTS2P

– 3 –

2.0 AVAILABLE MODELS

2.1 TS2 Models

Model Tension

Ranges [g]

*Measuring Head

Width [mm]

**Factory

Calibration Material

TS2-50 0 - 50 64 PA: 0.12 mm Ø

TS2-100 0 - 100 64 PA: 0.12 mm Ø

TS2-200 0 - 200 64 PA: 0.12 mm Ø

TS2-500 0 - 500 64 PA: 0.20 mm Ø

TS2-1K 0 - 1000 64 PA: 0.30 mm Ø

TS2-2K 0 - 2000 124 PA: 0.50 mm Ø

TS2-5K 0 - 5000 124 PA: 0.80 mm Ø

TS2-10K 0 - 10 Kg 124 PA: 1.00 mm Ø

TS2-20K 0 - 20 Kg 224 PA: 1.50 mm Ø

TS2-50K 0 - 50 Kg 224

Steel rope: 1.5mm Ø

(7 x 7 x 0.20)

TS2 Guide Rollers

V-Groove

Line Speed

[m/min ... max.]

Roller Material

Standard 2000 Hardcoated aluminium

Code K 3500 Hardcoated aluminium

Code H 5000

Plasma-coated aluminium

(TS2-100 and higher ranges)

Code T 1000 Plastic (POM) black

Code W 1000 Nickel-plated steel

Code ST 1000 Hardened steel

Code B 1000

Tempered steel, specially for

measuring tire cord

Code CE1 1000 Ceramic

Asymmetrical

Groove

Code ASY

1000

Hardcoated aluminium

(TS2-500 and higher ranges)

Code ASYB 1000

Tempered Steel

(TS2-500 and higher ranges)

U-Groove

Code U

2000

Hardcoated aluminium

(TS2-500 and higher ranges)

* Depending on model, either width of lament guide or outer distance between outside

guide rollers.

** Suitable for 95% of applications. PA = Polyamide Monolament

Should the process material differ signicant from the factory calibration material

in size, rigidity or shape, we recommend special calibration using customer supplied

material.

International unit of tensile force: 1 g = 1.02 g = 0.01 N

1 Kg = 1.02 kg = 10.00 N

–10 –

4.2 GAIN Adjustment

Requirement: ZERO adjustment carried out.

1. Thread the process material through the measuring and guide rollers, following

the material path symbol on the front of the sensor.

2. Hang a weight that corresponds to e.g. 95% of the tension range from the

process material.

3. Adjust the potentiometer, which you can reach through the GAIN hole in the

  

display of the connected volt meter reads,

for example:

Sensor model TS2 - 200:

Weight 190 g = Display 0.950 V for TS2 standard version

Weight 190 g = Display 9.50 V for TS2 version with 10 V output signal.

WARNING: Do not insert the screwdriver at an angle as this may damage

the potentiometer.

4. Check the adjustments with a fresh portion of the process material and repeat

the procedure, if required, as described in Chapters 3.3.1 and 3.3.2.