Manual

– 2 –

1.0 INTRODUCTION

The TS2 Series of universal tension sensor accurately measure the running tension

of wires, cables, yarns, bers and similar process material.

2.1 Delivery





2.2 Unpacking

Unpack the instrument and inspect it for any shipping damage. Notices of defect

must be led immediately, in writing, at the latest within 10 days on receipt of the

goods.

2.3 Model and Serial Numbers



clylindrical portion of the sensor.

TS2-1K + ASY = TS2-1K-ASY

Model with

tension range

Code for guide rollers

(if not standard)

Complete Model No.

– 11 –

5.0 SPECIFICATIONS

5.1 General Speciﬁcations

Calibration According to factory procedure

Accuracy For 10% to 100% of range: ± 1% Full Scale

Other calibration material: ± 3% Full Scale or

better

Overload Protection 100% of range

Measuring Principle Strain gauge bridge

Meas. Roller Deﬂection 0.5 mm, max.

Natural Frequency of

Measuring Spring Approx. 500 Hz, depending on tension range

Signal Processing Analog

Output Signal 0 - 1 V DC, impedance: > 5 kOhm (standard)

Option Code DC 0 - 10 V DC

Damping (fg) Standard: approx. 30 Hz (other values on

request)

Temperature Coefﬁcient Zero point: less than ± 0.05% FS* / °C

Temperature Range 10 – 45 °C

Air Humidity 85% RH, max.

Power Supply 15 to 24 V DC (21mA) (regulated)

Option code A3: max. 50 mA

Housing Aluminium