User Manual

– 4 –
2.0 QUICK STARTUP GUIDE
The TI-UMX2 is pre-configured at Electromatic Equipment Company with a
specific and common setup. As a result, the gauge should be ready to measure once
the transducer has been connected. The TI-UMX2 can use two different styles of
transducers; dual element and single element membrane. As a result, the gauge will be
configured according to the transducer style purchased, as follows:
2.1 Factory Setup Parameters (Single Element Menu Structure)
2.2 Quick Start (Single Element)
1. Referring to the diagram above, be sure the dongle
and transducer are connected as illustrated.
NOTE: 
transducer that has been attached, it
must be in the proper channel location.
2. Press and release the single button located on
the end of the TI-UMX2. The displays should
illuminate, and led lights will begin flashing.
3. The smaller of the two displays will begin scrolling the current configuration


plugged into the wrong channel. Press and hold down the button for approximately
30 seconds, or until the TI-UMX2 powers off. Repeat steps 1 – 3 until the probe has
been identified.
4. The TI-UMX2 is ready to begin making measurements.
– 53 –
Material Sound velocity Sound velocity
in/us m/s
Aluminum 0.2510 6375
Beryllium 0.5080 12903
Brass 0.1730 4394
Bronze 0.1390 3531
Cadmium 0.1090 2769
Columbium 0.1940 4928
Copper 0.1830 4648
Glass (plate) 0.2270 5766
Glycerine 0.0760 1930
Gold 0.1280 3251
Inconel 0.2290 5817
Iron 0.2320 5893
Cast Iron 0.1800 (approx) 4572
Lead 0.0850 2159
Magnesium 0.2300 5842
Mercury 0.0570 1448
Molybdenum 0.2460 6248
Monel 0.2110 5359
Nickel 0.2220 5639
Nylon 0.1060 (approx) 2692
Platinum 0.1560 3962
Plexiglas 0.1060 2692
Polystyrene 0.0920 2337
PVC 0.0940 2388
Quartz glass 0.2260 5740
Rubber vulcanized 0.0910 2311
Silver 0.1420 3607
Steel (1020) 0.2320 5893
Steel (4340) 0.2330 5918
Steel Stainless” 0.2230 5664
Teflon 0.0540 1372
Tin 0.1310 3327
Titanium 0.2400 6096
Tungsten 0.2040 5182
Uranium 0.1330 3378
Water 0.0580 1473
Zinc 0.1660 4216
Zirconium 0.1830 4648
16.0 APPENDIX A – VELOCITY TABLE