User guide

–12–
No. Position of the
Selector Switch
(E)
Adjustable
Parameters
Description Display
(7) MENU DIV:
1…2550
Pulse divider, max value 255.
This function is only possible when the
external trigger is selected
Pulse divider (DIV)
The pulse divider can be used to set a value x, by which the external trigger signal is then divided.
Example: when scanning a cog wheel, an external trigger (e.g. rotational speed sensor) sends our a signal
for each cog scanned. With a DIV value of 10, it will only ash once every 10 signals.
(8) MENU SLOW:
0…600
The ash frequency exceeds the trigger
frequency by the value selected.
This function is only possible when the
external trigger is selected
SLOW (slow motion)
The SLOW function allows the viewer to view movement in slow motion. The speed of the slow motion
depends on the ash frequency and corresponds to the value selected.
(10) MENU TRIG:
0 / 1
Selection of trigger signal edge
(increasing 0, decreasing 1.
This function is only possible when the
external trigger is selected
(11) MENU MEM IN:
1 … 5
Selected settings can be backed up in
ve separate storage locations.
(11) MENU MEM OUT:
1 … 5
It is possible to read backed-up
settings.