Instruction Manual

Trident Model PD765 Universal Input Meter Instruction Manual

Reset Meter to Factory Defaults

When the parameters have been changed in a way that is difficult to

determine what’s happening, it might be better to start the setup pro-

cess from the factory defaults.

Instructions to load factory defaults:

1. Enter the Advanced features menu. See Advanced Features Menu,

page 50.

2. Press Up arrow to go to Diagnostics menu

3. Press and hold Right arrow/Reset for five seconds, press

Enter/Ack when display flashes reset.

Note: If Enter/Ack is not pressed within three seconds, display re-

turns to Diagnostics menu.

4. The meter goes through an initialization sequence (same as on

power-up), and loads the factory default settings.

rset

diag

Press Simultaneously

Meter Re-

Initializes

Press and Hold

for 5 Sec

Flashing

Display