Instruction Manual

Trident Model PD765 Universal Input Meter Instruction Manual
57
MeterView
®
Software
Precision Digital’s MeterView
®
software allows the Trident to be pro-
grammed from a PC and to act as a data logger.
MeterView
®
software allows all setup parameters to be saved to a file
for reporting, restoring, or programming other meters.
See Ordering Information, page 3 to order MeterView
®
software.
Note: PDC protocol must be selected to communicate with MeterView
®
.
Meter Copy Function (
Copy)
The Copy function is used to copy (or clone) all the settings from one
meter to other meters requiring exactly the same setup and program-
ming (i.e. type of input, scaling, decimal point, filter, bypass, etc.).
Cable Assembly
Master Clone
C
o
P
y
Figure 16. Meter Copy Connection
Copy Function Requirements
To successfully copy settings from one
meter to another, both meters must have:
1. Same software version
2. Same baud rate setting
3. PDC protocol selected
See Determining Software Version,
page 65 for instructions.