Instruction Manual

Trident Model PD765 Universal Input Meter Instruction Manual
25
Display Parameter Action/Setting
inp2
Input 2
Calibrate input 2 signal or program input 2
value
dis2
Display 2
Program display 2 value
err
Error
Error, calibration not successful, check signal
RELY
Relay
Enter the Relay menu
RLY1
Relay1
Relay 1 setup
Act1
Action1
Set relay 1 action (automatic, latching, etc.)
Auto
Automatic
Set relay for automatic reset
A-m
Auto-manual
Set relay for automatic + manual reset any
time
LtCH
Latching
Set relay for latching operation
L-CL
Latching-
cleared
Set relay for latching operation with manual
reset only after alarm condition has cleared
Altr
Alternate
Set relays for pump alternation control
oFF
Off
Disable relay and front panel status LEDs
Disable relay’s fail-safe operation
Set1
Set1
Program set point 1
rSt1
Reset1
Program reset point 1
RLY2
Relay2
Setup relay 2
Act2
Action2
Set relay 2 action (automatic, latching, etc.)
Set2
Set2
Program set point 2
RSt2
Reset2
Program reset point 2
FLSF
Fail-safe
Enter Fail-safe menu
FLS1
Fail-safe1
Set relay 1 fail-safe operation
on
On
Enable fail-safe operation
FLS2
Fail-safe2
Set relay 2 fail-safe operation
DLAY
Delay
Enter Time Delay menu
DLY1
Delay1
Enter relay 1 time delay setup
On1
On1
Set relay 1 On time delay
OFF1
Off1
Set relay 1 Off time delay