Owner's manual

Product subject to change without notice.
DIMENSIONS
SUPPLY VOLTAGE
•
10 to 30 VDC
•
Polarity Protected
CURRENT REQUIREMENTS
•
45 milliamps (exclusive of load)
OUTPUT TRANSISTORS
•
(1) NPN and (1) PNP output transistors
•
Sensor outputs can sink or source up to 150 milliamps
(current limit)
•
All outputs are continuously short circuit protected
RESPONSE TIME
•
Light state response = 100 microseconds
•
Dark state response = 100 microseconds
LED LIGHT SOURCE
•
High intensity red LED
•
Pulse modulated
PUSH BUTTON CONTROL
•
Automatic set-up routines based on web opacity
•
One push button set-up
•
Simultaneously pushing both buttons inverts the output
SPECIFICATIONS
HYSTERESIS
•
Minimal hysteresis promotes the detection between the
backing material and the label depending on the settings
LIGHT IMMUNITY
•
Responds to sensor’s pulsed modulated light source …
immune to most ambient light
INDICATORS
•
Green LED flashes when Autoset™ routine is activated
and stays illuminated when Autoset™ is completed
•
Red LED illuminates when sensors output transistors
are “ON”.
Note: The status of the output transistors can be inverted
by pushing both buttons simultaneously
AMBIENT TEMPERATURE
•
–40°C to 70°C (-40°F to 158°F)
RUGGED CONSTRUCTION
•
Chemical resistance to harsh cleaners such as
detergents, alcohols, and ketones
•
Waterproof, ratings: NEMA 2
•
Conforms to heavy industry grade CE and UL requirements
Model Numbers:
Label•Eye Description
LER Red LED, 4 conductor 6 ft. cable
LERC Red LED, 4-pin Nano connector
P/N Length Thread Coupling
GEC-6 6 ft. (1.8m) Straight Female
GEC-15 15 ft. (4.6m) Straight Female
RGEC-6 6 ft. (1.8m) 90° Female
RGEC-15 15 ft. (4.6m) 90° Female
Nano Cable (M8) Selection Guide
CHECK
•
LINE
®
–PRECISION QUALITY CONTROL INSTRUMENTS
Electromatic Equipment Co., Inc.
600 Oakland Ave.
Cedarhurst, N Y 11516 —USA
Tel: [phone] (USA & Canada)
Tel: [phone]
Fax: [phone]
Email: [e-mail]
Website: www.checkline.com