Owner's manual

– 3 –
2.0 Safety Information
The LS-18-LED must only be used in accordance with these operating instructions. The
LS-18-LED must not be altered in any way. The manufacturer will not be liable for any
damage resulting from incorrect or improper use. This will also render the guarantee
null and void.
• Under strobe lighting, moving objects appear stationary or in slow
motion. The objects should never be touched.
• The LS-18-LED must not be used in explosion hazard areas.
• Store the LS-18-LED in a dry place. It must not be exposed to
water (dripping or splashing). No objects lled with liquids
(e.g. vases) should be placed on the unit
• Strobe lighting can trigger epileptic ts in those who are
susceptible.
• Repairs should only be carried out by the manufacturer or supplier.
• The stroboscope’s electronic components contain environmentally
harmful substances. They must be disposed of in accordance with
the relevant national environmental guidelines.
– 10 –
General Parameters
Frequency range 0 to 120,000 FPM (ashes per minute)
Power supply 24 VDC (+/– 10%)
DIN 415245-pin standard plug
Universal power supply unit available
Power consumption 40 Watt
External trigger input 3 to 30 V / max. 5 mA
potential-free optocoupler
DIN 41524 5-pin standard plug
U = U, max. 200 mA
Switchable trigger input trigger output
for parallel connection
Flash Parameters
Light intensity/sharpness Adjustable with turning knob
Light intensity single flash Approximately 1.2 Mega-Lux / 12" (30 cm)
Light intensity 9,000 Lux / 12” (30 cm)
Illumination area 12 x >20" (30 x >50 cm)
Flash color Ca. 5,000…8,300 K
Housing
Material Aluminium with glass lens
Dimensions 17.3 x 5.1 x 4.4" (440 x 130 x 112mm)
Weight 4.63 lbs. (2.1Kg)
Ambient Conditions
Ambient temperature 32 to 114 °F (0 to 40 °C)
Storage temperature –13 to 158°F (–25 to 70 °C)
Humidity maximum 95% not condensing
Certifications CE conformity
7.0 Technical Data