Instruction Manual
– 6 –
4.1 Menu
There are 3 menu levels Main menu
The symbols show the key functions in Edit logs
the different menus. Manual logs
1. Type selection: Clear logs
2. Saving: Print logs
3. Main Menu Last Logs
Rolling menu: Use this key to enter the All logs
different menu levels and main menu. Clear logs
Power: Press this key for 3 seconds to Send logs
switch the instrument off or on. Press this Manual logs
key briey to activate the display lighting. Clear logs
Up: This key moves you to the next Options
type/calibration curve. Date / Time
Down: This key moves you to the Logtime
previous type/calibration curve. Language
Disk: Use this key to save measurement Unlock
values. °C / °F
If the number in front of the disk symbol Calibrate
increases, the measuring value has been saved o Userlevel
BL On Time
Alternatively: Auto Off time
Hold: The currently shown Materialcalib.
measurement value is held. It is released Password
when another key is pressed. Reset
View logs: If no logs are active, you can use this SN
symbol to view the saved measuring series Logo
Tm
Alternatively: Admin
Edit logs: If logs are active, Status
you can press this symbol and then enter
e.g. batch number and supplier’s data for the series.
In the saving level, press (rolling menu) to enter the main menu.
4.2 Key functions in the menu
: Conrm – activates menu item
: Up – long press => jumps to the start of the menu
: Down – long press => jumps to the end of the menu
: Exit – exits the menu item or menu