Manual

ManualsBrandsCheckline ManualsMeasuring instrumentsHPSA-R

-1-

TABLE OF CONTENTS

1.0 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

1.1 Unpacking

1.2 Complete Kit

2.0 Operating Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

2.1 Memory Pointer

2.2 Upper and Lower Limit Markers

3.0 Verifying Functionality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

5.0 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

6.0 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Pressure on the spring-loaded outer ring which exceeds the

range of the instrument by more than 100% may cause permanent

damage to the measuring spring and must be avoided under any

circumstances.

This device must not be operated in explosion hazard areas and

must not come into contact with aggressive substances.

WARNING

-8-

NOTES

Summary of content (5 pages)

PAGE 1
NOTES TABLE OF CONTENTS 1.0 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1.1 Unpacking 1.2 Complete Kit 2.0 Operating Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2.1 Memory Pointer 2.2 Upper and Lower Limit Markers 3.0 Verifying Functionality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 5.0 Specifications . . . . . . . . . . . . . . . . . . . .
PAGE 2
1.0 INTRODUCTION 6.0 This manual covers the operation of the Check•line HPSA-R Durometer. This gauge is a customized version of the Check•Line HPSA featuring a concave radius bottom and truncated sensing pin for measuring rubber coated rollers, such as cots, nip rollers, pressure rollers, etc. Three HPSA-R models, each with different concave radii, are available for use on different roller sizes (see page 6 for details).
PAGE 3
5.0 SPECIFICATIONS 2.0 OPERATING PROCEDURES Model: HPSA-R20 Workface Radius: Indentation Body: Depth of Indentation: Test pressure*: Meas. spring force: Display range: Scale diameter: Working face diameter: Weight approx. Dimensions: 20 mm Truncated Cone 35°, 1.25 mm Ø 0 – 2.5 mm approx. 12.5 N 0.55 - 8.065 N 0 – 100 Shore hardness graduation marks 54 mm 18mm 300 g net/ 500 g gross 50 (L) x 50 (W) x 110 mm (H) 1. Before beginning a new measurement, reset the Memory Pointer to the zero position.
PAGE 4
2.1 Memory Pointer 3.0 VERIFYING FUNCTIONALITY The Memory Pointer moves with the measurement pointer when a measurement is taken. However, when pressure on the outer shell is released, and the measurement pointer returns to zero, the Memory Pointer remains in position, marking the last measurement. To return the Memory Pointer to the zero position prior to taking another measurement, rotate the knurled knob on the face of the instument counterclockwise until the pointer has been reset.
PAGE 5
OI504-HPSA-R CHECK•LINE BY ELECTROMATIC HPSA-R SERIES SHORE DUROMETERS CHECK•LINE ® INSTRUMENTS ELECTROMATIC E Q U I P M E N T C O ., I N C . 600 Oakland Ave., Cedarhurst, NY 11516–U.S.A.