Owner manual

ManualsBrandsCheckline ManualsSensorsFH Series

14. Technical specification

14.1 Gauge and Sensor Specification

Measuring principle:

magneto-static principle, suitable for nonmagnetic materials

Measuring rate: 20 readings per second (factory set)

Number of readings to be logged

for statistics:

1, 2, 5, 10 or 20 readings per second (user adjustable)

Sensor types: FH4 FH10

Low range resolution: 0.1 µm 0.2µm

Display resolution Ranges Resolution:

0.0 µm – 59.9 µm

60.0 µm – 149.9 µm

150.0 µm – 299.5 µm

300.0 µm – 599.0 µm

600.0 µm – 998.0 µm

1.000 mm – 1.498 mm

1.500 mm – 2.995 mm

3.00 mm – 5.99 mm

6.00 mm – 10.12 mm

0.1 µm

0.2 µm

0.5 µm

1 µm

2 µm

5 µm

10 µm

20 µm

FH4 Sensor

Tolerance:

Target ball Ø

Measuring

range

Reproducibility

Factory

calibration:

Zero-point

calibration

Multi-point

calibration

1.5 mm 0 ... 1.5 mm ± (1.5 µm + 0.5%)* ± (10 µm + 3%)* ± (5µm + 1.5%)* ± (3µm + 1%)*

2.5 mm 0 ... 2.5 mm ± (2.5 µm + 0.5%)* ± (15 µm + 3%)* ± (8µm + 1.5%)* ± (5µm + 1%)*

4.0 mm 0 ... 4.0 mm ± (5 µm + 0.5%)* ± (30 µm + 3%)* ± (15µm + 1.5%)* ± (10µm + 1%)*

FH10 Sensor

Tolerance:

Target ball Ø

Measuring

range

Reproducibility

Factory

calibration:

Zero-point

calibration

Multi-point

calibration

2.5 mm 0 ... 2.5 mm ± (2.5 µm + 0.5%)* ± (15µm + 3%)* ± (8µm + 1.5%)* ± (5µm + 1%)*

4.0 mm 0 ... 4.0 mm ± (5 µm + 0.5%)* ± (30µm + 3%)* ± (15µm + 1.5%)* ± (10µm + 1%)*

0 ... 6 mm ± (10 µm + 0.5%)* ± (50µm + 3%)* ± (30µm + 1.5%)* ± (20µm + 1%)*

6.0 mm

6 ... 10 mm ± 0.5%* ± 4%* ± 2.5%* ± 1.5%*

9.0 mm 0 ... 10 mm ± (10 µm + 0.5%) * ± (50µm + 3%)* ± (30µm + 1.5%)* ± (20µm + 1%)*

• All percentages are related to the measuring value

Measurement on horizontal surfaces, mean value calculated from a minimum of 10 readings