Models ES10 & ES20 User’s Guide Force Test Stands Series ES MODELS ES10 & ES20 U se r’s Guide
Models ES10 & ES20 Thanks! Thank you for purchasing a Mark-10 Series ES Force Measurement Test Stand. We are confident that you will get many years of service from this product. Series ES test stands can be used in any number of compression and tension testing applications. Both models ES10 and ES20 are designed for testing up to 100 lb (500 N). To maintain smooth mechanical functioning of your test stand, avoid repetitive overloads and shock loads.
Models ES10 & ES20 User’s Guide OTHER TEST STANDS BY MARK-10 UNPACKING AND SETTING UP 1. Carefully unpack the stand and inspect for any damage. Inspect the contents to ensure that you have received a test stand complete with all accessories – see “List of included items” section. TSAH 2. Install the loading lever into the hub on the ES10 stand or install the handwheel on the ES20 stand. TSTM TSCH TST TSA 3.
Models ES10 & ES20 User’s Guide OPERATION DIMENSIONS In [mm] The test stand can be mounted to a work bench using the clearance holes in the base – see drawing for hole location. The included mounting hole drill template can be used to locate holes in work area. The loading lever on the ES10 can be adjusted to allow for ease of operation. Reposition the lever using one of the three tapped holes located in the hub – refer to the dimensional drawing on the next page. CLEARENCE HOLE FOR 5/16 SCREW X2 1.
