Instruction Manual

3
2.0 OVERVIEW
2.1 Gauge
ON/OFF
Switch
ZERO Key
LCD Display
PROBE
STATISTICS
Key
14
9.0 MEASURING LIMITS
Minimum Radius for Convex Surfaces 0.2" (5mm)
Minimum Radius for Concave Surfaces 2" (50mm)
Minimum Headroom 2" (50mm)
Minimum Sample Diameter 0.4" (10mm)
Minimum Substrate Thickness - F 0.020 mils (0.5 mm)
Minimum Substrate Thickness - NFe 0.002 mils (0.05 mm)
3
2.0 OVERVIEW
2.1 Gauge
ON/OFF
Switch
ZERO Key
LCD Display
PROBE
Battery Compartment
(On rear)
Battery Compartment
(On rear)
STATISTICS
Key
14
9.0 MEASURING LIMITS
Minimum Radius for Convex Surfaces 0.2" (5mm)
Minimum Radius for Concave Surfaces 2" (50mm)
Minimum Headroom 2" (50mm)
Minimum Sample Diameter 0.4" (10mm)
Minimum Substrate Thickness - F 0.020 mils (0.5 mm)
Minimum Substrate Thickness - NFe 0.002 mils (0.05 mm)