Technical data

Configuring VSX
Check Point VSX Administration Guide NGX R67 | 50
Virtual System - Remote Access
The Remote Access page contains properties that govern establishing VPN connections with Remote
Access clients. This window is only available if the Check Point VPN product is enabled on the General
Properties page.
Please refer to the online help and the R75 VPN Administration Guide
(http://supportcontent.checkpoint.com/documentation_download?ID=11675) for further details regarding
VPN with Remote Access clients.
Virtual System - Authentication
The Authentication page allows you to enable several different authentication options for a VSX gateway.
The Authentication section ("Working with Authentication" on page 63) provides additional details.
Virtual System - Logs and Masters
The Logs and Masters page allows you to define logging options for a VSX gateway. The SmartView
Monitor ("Tracking Activity with SmartView Monitor" on page 69) section provides additional details for
working with logs.
Virtual System - Capacity Optimization
The Capacity Optimization page allows you to maximize Virtual System and VPN throughput by limiting
the following connection parameters:
 Concurrent connections (Default = 15,000)
 Number of concurrent IKE negotiations (Default = 200)
 Number of concurrent VPN tunnels (Default = 200)
To raise or lower the maximum, use the arrows in the appropriate field to set the desired value. If you
change the Maximum concurrent connections option, you must install a policy to the Virtual System.