Technical data

Configuring VSX
Check Point VSX Administration Guide NGX R67 | 35
Defining Physical Interfaces
In the VSX Gateway Interfaces window, define physical interfaces as VLAN trunks. The table shows the
interfaces currently defined on the gateway machine.
To define an interface as a VLAN trunk, select VLAN Trunk.
Virtual Network Device Configuration
If you chose the Custom Configuration option, the Virtual Network Device Configuration window opens.
In this window, define a Virtual Device with an interface shared with the VSX gateway. If you do not want to
define a Virtual Device at this time, click Next to continue.
To define a virtual device with a shared interface:
1. Select Create a Virtual Device.
2. Select the Virtual Network Device type (Virtual Router or Virtual Switch).
3. Select the shared physical interface to define a non-DMI gateway.
Do not select the management interface if you want to define a Dedicated Management Interface
(DMI) gateway. If you do not define a shared Virtual Device, a DMI gateway is created by default.