Technical data

Command Line Reference
Check Point VSX Administration Guide NGX R67 | 202
Description
Restores a VSX configuration to a newly installed gateway or cluster
member
Comments
 This command is also useful for restoring a gateway or cluster
member after a system failure.
 Execute the command and follow the instructions on the screen.
 A new gateway or cluster member must have the same hardware
specifications and configuration as its replacement and other cluster
members. Most importantly, it must have the same number of
interfaces (or more) and the same management IP address.
 The new or replacement machine must be a new installation. You
cannot use a machine with a previous VSX configuration.
remove_member
Description
Removes a member from an existing cluster
Syntax
vsx_util remove_member
Comments
 Backup the management database before using this command
 Make certain that you remove member license before executing this
command
 Execute the command and follow the instructions on the screen
show_interfaces
Description
Displays selected interface information in a VSX deployment. Provides information regarding
interface types, connections to virtual devices, and IP addresses. The output appears on the
screen and is also saved to the interfacesconfig.csv file.
Syntax
vsx_util show_interfaces
Parameters
Option
Description
1) All Interfaces
Show all interfaces (physical and Warp)
2) All Physical Interfaces
Show Physical interfaces only
3) All Warp Interfaces
Show Warp interfaces only
4) A Specific Interface
Enter the interface name when prompted to a specific
interface.
Note - You cannot specify a VLAN tag as a parameter for the
Specific Interface option. You can, however, specify an interface
used as a VLAN (without the tag suffix) to view all tags associated with
that interface. This is illustrated in the sample output below.
Sample Output